Easy ARM 1/2

Highly efficient and compact fume extraction unit for single/two workplaces

Ersa solder fume extraction units are based on over 15 years of experience in process air cleaning by Ersa.

They stand out by a high suction power and an efficient filter performance combined with super silent operation. Exhaust volume per arm is 110 m³/h. Both the EASY ARM 1 and EASY ARM 2 are equipped with filters that clean the process air in three stages: The pre-filter absorbs dust and big particles. The combined filter separates micro particles which occur during soldering and absorbs dangerous gas molecules in the incorporated activated carbon filter.

The operator can choose between a system with one exhaust arm – the EASY ARM 1 – and a unit with two exhaust arms – the EASY ARM 2. Both units can be mounted individually by means of their table clamp. Exhaust power is set independently for each extraction arm at the touch of a button.

The EASY ARM 1 and EASY ARM 2 use an identical pre-filter and combined filter. Optical and acoustical signals inform the operator when filters have to be exchanged. A wide range of exhaust arms and nozzles for all applications are available so that the user will find the proper solution for his requirements.

For energy saving purposes and to extend filter lifetime, both units can be connected with Ersa i-CON soldering stations or a standby switch. In this way, the extraction unit is only working whilst the attached soldering station is in operation, stopping as soon as the soldering station goes into standby mode.

  • Continuously settable extraction power
  • Effective 3-stage filter system - 99,95% filter degree
  • 110 m³/h air flow per extraction arm
  • Optical and acoustical reminder signal for filter exchange
  • High performance filter materials, filters fit to both systems of the EASY ARM series
  • Interface to connect to an i-CON soldering station or a standby-switch
  • Master-slave operation (easy arm 2)
  • Flexible system of extraction arms and nozzles allows individual setup for each workplace
  • Small footprint
Easy ARM 1 Easy ARM 2
Dimensions (W x D x H) in mm 255 x 255 x 470 255 x 490 x 470
Weight in kg 7,5 15
Antistatic Design (y/n) y y
Power Rating in W 40 80
Nominal voltage in V AC 100 - 240 100 - 240
Noise level in dB (A) 50 50
Test symbol CE CE
Volume flow in m³/h 110 2 x 110
Michal Duda Sales Manager (soldering equipment, devices)
mobile
+420 724 018 761
phone
+420 571 669 312
email
m.duda%a-t%pbt.cz

Send me your question.

Your personal data will be processed according to the privacy policy.